← All user guides
Guide RealMax Scientific & Pro

Scientific Calculator guide

Everything you need to get the most out of RealMax Scientific Calculator and Scientific Calculator Pro. Both apps share the same keys and modes.

1.0Introduction

A single key can have more than one command. Which command runs depends on the key combination you press. In this guide a key is shown like this, and Key1 + Key2 means press Key1, then press Key2.

Key text colourHow to use it
YellowPress SHIFT first, or long-press the key.
RedPress ALPHA first.

Move through an expression with the left and right arrow keys. Browse your calculation history with the up and down arrow keys.

2.0Scientific mode

2.1 Switch to Scientific mode

Scientific is the default mode. To return to it, press MODE and choose Scientific.

2.2 Change the angle unit

Press DRG and pick Degrees, Radians or Gradians from the menu.

2.3 Convert angles

Example: convert 90 degrees to radians.

  1. Switch to radians: press DRG and select Radian.
  2. Press 90drg., select degrees, then press =.
  3. The answer is 1.570… radians.

2.4 Mathematical constants

Press CONST and pick a constant. The list shows each constant's name and value.

2.5 Convert units

Long-press CONV (or press SHIFT + CONV) and choose the conversion.

Example: convert 1 inch to centimetres. Press 1SHIFTCONV, select in → cm, and the answer is 2.54.

2.6 Store and recall variables

You can store values in 10 variables: ABCDEFXYZM.

Store the result of 15 + 47 in A:

15+47SHIFTSTOA

Recall the value in A: RCLA

2.7 Fractions

Press d/c to enter a fraction. The display shows two boxes for the numerator and denominator. After you press =, press d/c again to switch the answer between fraction and decimal.

2.8 Degrees, minutes and seconds

Enter an angle in DMS format with the ° ′ ″ key. Press ° ′ ″ again to convert an answer to DMS.

2.9 Answer format

Answers can be shown in three formats:

  • Fix: a fixed number of decimal places.
  • Sci: scientific notation, a value times a power of ten.
  • Norm: normal display. Very long values switch to Sci automatically.

Long-press 0.00 (or press SHIFT + (*)) and choose the format. Use the arrows in the menu to change the number of decimal places.

2.10 Percentages

QuestionKeys
12% of 250250×12%
250 plus 12% tax250+12%
250 minus 12% discount250−12%
5/6 as a percentage5÷6%

2.11 Logarithm in any base

To get log of x in base n, enter log( n , x ) and press =.

3.0Graph mode

3.1 Draw a graph

  1. Press MODE and select Graphs.
  2. Enter a function, for example cos X, and press =. The graph opens in a new window.

Draw several functions together by separating them with :. For example, enter cos X : sin X and press =.

3.2 Share a graph

Tap the share button in the graph window and choose where to send it.

4.0Equation mode

4.1 Linear equations

Press MODE and select Linear Equation. You need as many equations as unknowns. To solve:

X + Y = 3 and X − Y = 5

  1. Enter X+Y=3:X−Y=5 and press =. The answer is X = 4.
  2. Press = again to see Y = −1.

Separate each equation with :, and type the equals sign inside an equation with the special = key on the middle right of the keypad, not the main = key.

4.2 Polynomial equations

Enter the equation in simple form, like x^2+5x−7=0, and press =. The first root is shown. Press = again to see the other roots.

5.0Base mode

5.1 Switch to Base mode

Press MODE and select Base. Then choose a number base:

KeysBase
SHIFTBINBinary
SHIFTOCTOctal
SHIFTDECDecimal
SHIFTHEXHexadecimal

In Base mode, only the variables X, Y, Z and M can store values.

5.2 Valid number ranges

Values use two's complement. Binary mode accepts −32768 to 32767, and the other modes accept −2147483648 to 2147483647. Anything outside the range shows Math Error!

ModeMinimumMaximum
BIN1000,0000,0000,0000111,1111,1111,1111
OCT200,0000,0000177,7777,7777
DEC-21474836482147483647
HEX800000007FFFFFFF

5.3 Convert between bases

Example: find the decimal value of 101011112.

  1. Switch to decimal: long-press DEC.
  2. Press b10101111=. The answer is 175.

5.4 Mix bases in one expression

Put a prefix before each value to set its base. The answer is shown in the current base.

BasePrefixExample
BINbb101101
OCToo55
DECdd45
HEXhh2D

Example: 101012 + A2B16

b10101+hA2B=

5.5 Logic and binary operations

Enter the expression as usual and press =.

OperationKeyOperationKey
AndANDAdd+
OrORSubtract−
Exclusive NORXNORMultiply×
Exclusive ORXORDivide÷
NotNOTLeft shift<<
NegativeNEGRight shift>>

Example: 112 AND 012

  1. Switch to binary: SHIFTBIN
  2. Enter 11AND01=

6.0Complex mode

6.1 Enter complex numbers

Use i for rectangular form (x + yi) or ∠ for polar form (x ∠ θ). Complex mode supports the common operations, plus these special keys:

OperationKey
Absolute valueabs
Argumentarg
Conjugateconjg

6.2 Answer format

Press 0.00 to choose rectangular or polar answers. Long-press = to see the current answer in the other format.

7.0Matrix mode

7.1 Set up a matrix

  1. Press Dim to open the Matrix Dimension dialog.
  2. Select the matrix you want to change, then scroll the middle box to pick its size (up to 6×6). The size appears in the dialog title.
  3. You can set up several matrices at once by selecting the others too.
  4. Press Apply. The calculator opens the matrix for editing.

Changing a matrix's dimension clears all of its cells.

7.2 Edit a matrix

Press Edit and pick the matrix. Editing starts at cell 0,0: type a value and press = to move to the next cell. Tap any cell to jump straight to it.

7.3 Matrix operations

Press Mat and choose a matrix from the list to insert it. Below, MatA means Matrix A chosen from that list.

OperationKeys
Scalar multiplicationMatA× scalar =
Matrix multiplicationMatA×MatB=
AdditionMatA+MatB=
SubtractionMatA−MatB=
DeterminantDetMatA=
InverseMatAX⁻¹=
TransposeTraMatA=
© 2026 RealMax LK. All rights reserved.Google Play is a trademark of Google LLC. App Store is a trademark of Apple Inc.